Series 2603

Zetco AGA Approved Ductile Iron Flanged Lockable Ball Valve

2603 - Zetco AGA Approved Ductile Iron Flanged Lockable Ball Valve

FEATURES

  • Manufactured in Italy
  • Lockable handle allows valve to be locked in open or closed position
  • Ductile iron body and flange
  • Full bore
  • Australian Gas Association approval #6633
  • Double o-rings in the stem guarantee a dynamic seal
  • Blow-out proof stem
  • Carbon-reinforced PTFE ball seals guarantee consistent torque
  • For buried installations, valve must be completely wrapped in Denso® tape
  • Flanges are drilled to client specifications
  • Must be operated in fully open or closed position
  • All valves pressure tested during production
  • Size range: 50mm to 200mm

 

TECHNICAL FEATURES

  • Temperature range: -10°C to 70°C
  • Maximum operating pressure at nominal temperatures: 1600 kPa

The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.

Flange Drilling

Flange Drilling Pattern

Unless pre-drilled, all flanged valves include drilling to suit customer requirements.


Zetco can also drill the flanges of a single valve to different specifications, for retrofitting to existing pipework or equipment with non-standard or mismatched drillings.