Description
A DZR brass ball valve with BSP flare and loose nut & tail connections WaterMark approved to AS 5830.1 (Licence WM-000110). The integral tail with loose nut prevents leakage by reducing the number of joints required to quickly connect copper pipe to a continuous flow water heater while a quality PTFE washer offers additional leak protection between the valve and appliance.Design
Forged dezincification resistant brass bodyPTFE washer for reliable leak-free sealing against an appliance
Blow-out proof stem to prevent leakage
Production
Manufactured in Italy under ISO 9001 Quality Management SystemAll valves are pressure tested during production
Technical
JIS-30° flare connection conforming to AS 3688Loose nut: ISO 228/1 (BSPF) female parallel threaded connection
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range: -10°C to 90°C
Max. pressure: 2500 kPa (see graph)
Options & Variants
Size range: 15x15mm, 15x20mm & 20x20mmAlternative handle colours available on request
Series 1071 WaterMarked female x nut & tail
Series 1342 WaterMarked conetite x nut & tail
Series 1343 WaterMarked olive compression x nut & tail
Series 6301 WaterMarked press-fit x nut & tail
Series 1330 AGA approved flare x nut & tail
Series 1362 AGA approved SAE flare x nut & tail
Series 1331 AGA approved female x nut & tail
Series 6302 AGA approved press-fit x nut & tail
As component of continuous hot water installation kits