Series 1362

SAE Flare x Nut & Tail AGA Approved Brass Ball Valve

1362 - SAE Flare x Nut & Tail AGA Approved Brass Ball Valve

FEATURES

  • Manufactured in Italy
  • Full bore
  • Australian Gas Association approval #5301
  • Australian Patent Number 2006200845
  • Fitted with an integral loose nut & tail, making it ideal as an isolation valve for appliances such as continuous flow water heaters
  • PTFE gasket
  • Loose nut is protected by plastic cap to protect gasket
  • Blow-out proof stem
  • Must be operated in fully open or closed position
  • All valves pressure tested during production
  • Size range: 15mm to 20mm
  • Note: the valve is also available with a 15mm x 20mm connection

 

TECHNICAL FEATURES

  • Temperature range: -10°C to 80°C
  • Maximum operating pressure at nominal temperatures: 2100 kPa

The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.