Description
A brass ball valve AGA approved to AS 4617 (Licence 5301 G) featuring a loose nut & tail connection and female threaded end which enables the attachment of other fittings to the valve. The integrated nut & tail connection and quality PTFE washer reduce joints and prevent leakage while providing a tight seal between the valve and the gas inlet of a continuous flow water heater.Design
Forged nickel-plated brass body & nutsPTFE washer for reliable leak-free sealing against an appliance
Blow-out proof stem to prevent leakage
Production
Manufactured in Italy under ISO 9001 Quality Management SystemAll valves are pressure tested during production
Technical
Female connection conforming to ISO 7/1 Rp (BSPP)Loose nut: ISO 228/1 (BSPF) female parallel threaded connection
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range: -10°C to 80°C
Max. pressure: 2100 kPa *
*According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Options & Variants
Size range: 15x15mm, 15x20mm, 20x20mm & 25x25mmAlternative handle colours available on request
Series 1070 WaterMarked flare x nut & tail
Series 1071 WaterMarked female x nut & tail
Series 1342 WaterMarked conetite x nut & tail
Series 1343 WaterMarked olive compression x nut & tail
Series 6301 WaterMarked press-fit x nut & tail
Series 1330 AGA approved flare x nut & tail
Series 1362 AGA approved SAE flare x nut & tail
Series 6302 AGA approved press-fit x nut & tail
As component of continuous hot water installation kits