Description
A DZR brass ball valve WaterMark approved to AS 5830.1 (Licence WM-000110) for use in potable water installations where a lockable handle is required for added security and safety. The male connection accepts female fittings while the press-fit connection can be crimped using a range of popular V profile tools to form a secure o-ring seal against copper pipework.Design
Forged dezincification resistant brass bodyBlow-out proof stem to prevent leakage
Conical PTFE stem sealing system for additional leak protection
Handle can be locked in the open or closed position
Production
Manufactured in Italy under ISO 9001 Quality Management SystemAll valves are pressure tested during production
Additional testing to DVGW VP 614
Technical
Press-fit connection conforming to AS 3688Male ISO 7/1 R (BSP) threaded connection
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range: -15°C to 110°C
Max. pressure: 2500 kPa (refer to graph)
Use with Viega®, Rothenberger® & KemPress® V-profile tools only
Must be installed according to accompanying instructions (see p. 3-4)
Options & Variants
Size range: DN15 (1/2”) to DN50 (2”)Series 6107 WaterMarked press-fit x press-fit lockable lever handle
Series 6108 WaterMarked press-fit x female lockable lever handle
Series 6102 WaterMarked press-fit x male lever handle
Series 6209 AGA approved press-fit x male lockable lever handle