Print this page

Series 6203

Zetco AGA Approved DZR Brass Press-fit x Press-fit T Handle

6203 - Zetco AGA Approved DZR Brass Press-fit x Press-fit T Handle

Description

An AGA approved DZR brass ball valve (approved to AS 4617, Licence 5301 G) with a compact T handle and integral press-fit end connections designed for use in gas installations, particularly where space is limited. The the press-fit connections can be crimped onto copper pipework in gas applications using a range of popular V profile tools to form flame-free seals.

Design

Forged dezincification resistant brass body
Blow-out proof stem to prevent leakage
Conical PTFE stem sealing system for additional leak protection
Compact handle design for applications with limited space

Production

Manufactured in Italy under ISO 9001 Quality Management System
All valves are pressure tested during production
Additional testing to DVGW VP 614

Technical

Press-fit connection conforming to AS 3688
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range: -20°C to 100°C
Max. pressure: 2100 kPa (refer to graph)
According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Use with Viega®, Rothenberger® & KemPress® V-profile tools only
Must be installed according to accompanying instructions (see p. 3-4)

Product Enquiry Form

The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.