Print this page

Series 1724

Zetco Bronze WaterMarked 90º Angle Needle Valve

1724 - Zetco Bronze WaterMarked 90º Angle Needle Valve

Description

A quality bronze needle valve WaterMark approved to AS 1628 (Licence WM-020284) designed for use in both potable water and steam installations. The 90° angle body suits a wide range of equipment and system designs where throttling and fine control of media are required within a wide range of working pressures and temperatures.

Design

Body in high quality sand cast bronze
Suitable for applications where fine control is required
Suitable for use with potable water and steam
PTFE stem packing system to prevent leakage

Production

Manufactured in Italy under ISO 9001 Quality Management System
All valves are pressure tested during production

Technical

Female ISO 7/1 Rp (BSP) threaded connections
Flow control: Suitable for throttling and fine control
Max. pressure steam: 1400 kPa @ 198°C
Max. pressure water: 3200 kPa @ -10°C to 99°C
Refer to graph for ratings at specific temperatures

Options

Size range: DN8 (1/4") to DN15 (1/2")
Series 1725 WaterMarked bronze needle valve F&F
Series 2843 & 2844 AGA Approved stainless needle valve BSPT/NPT
Series 2803 & 2804 non-tested stainless needle valve BSP/NPT
Series 2805 & 2806 non-tested carbon steel needle valve BSP/NPT
NPT threads available on request

Product Enquiry Form

The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.