6302 - Press-fit x Nut & Tail AGA Approved DZR Brass Ball Valve



  • Manufactured in Italy
  • Australian Gas Association approval #5301
  • Press-fit joint compliant with AS 3688
  • Tested to DVGW VP 614
  • For use with Viega® , Rothenberger® and KemPress® V-profile tools only
  • Must be installed according to accompanying instructions & design guide
  • Conical PTFE stem sealing system
  • Blow-out proof stem
  • Must be operated in fully open or closed position
  • All valves pressure tested during production
  • Size range: 15x15mm, 15x20mm & 20x20mm



  • Temperature range: -20°C to 100°C
  • Maximum operating pressure at nominal temperatures: 2100 kPa
  • According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa





The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.