2603 Zetco AGA Approved Ductile Iron Flanged Lockable Ball Valve
A flanged ductile iron ball valve AGA approved to AS 4617 (Approval #6633 Type 1 - Isolation Valve). Double stem o-rings provide dynamic sealing to prevent leakage and carbon-reinforced PTFE ball seals ensure smooth reliable operation. The locking mechanism allows the valve to be locked in either the open or closed position for added safety and security.
Design Features
- Investment cast body and flange in ductile iron (B2.1 Series)
- Epoxy coating prevents corrosion, tuberculation and surface wear while promoting efficient flow of fluids
- Lockable lever handle for added safety and security
- Handle can be locked in the open or closed position
- Reinforced PTFE ball seals for consistent operating torque
- Blow-out proof stem to prevent leakage and ensure safety
Production
- Manufactured in Italy under ISO 9001 Quality Management System
- All valves are pressure tested during production
Technical
- Size range: DN25 (1") to DN150 (6")
- Flanges drilled to ANSI B16.5 150 or AS 2129 Table D/E
- Flow capacity: Full bore
- Flow control: On/off only, not intended for throttling
- Temperature range: -20°C to 70°C
- Max. pressure: 1600 kPa (refer to graph)
- NOTE: buried installations must be wrapped in Denso® tape
Certifications
 |
| AS 4617 AGA 6633 G |
Downloads