Print this page

Series 2125

Zetco HVAC WaterMarked DZR Brass Ball Valve c/w Extended Spindle, Test Plug & Drain

2125 - Zetco HVAC WaterMarked DZR Brass Ball Valve c/w Extended Spindle, Test Plug & Drain

Description

A DZR brass ball valve with WaterMarked to AS 5830.1 (Licence WM-000110), suitable for use with potable water and HVAC systems. For installations with insulated pipework, the extended spindle provides easy operation while the extended Twinlok® test plug and drain cock provide access for inserting testing equipment or for removing water for drainage.

Design

Forged dezincification resistant brass body
Extended spindle, test plug and drain cock for insulated pipework
Fitted with integral Twinlok® test plug for HVAC testing procedures
Integral drain cock allows system to be drained after shut-off
PTFE ball seals for smooth, reliable operation
Blow-out proof double o-ring stem sealing to prevent leakage

Production

Manufactured in Italy under ISO 9001 Quality Management System
All valves are pressure tested during production

Technical

Female ISO 7/1 Rp (BSP) threaded connections
Flow capacity: Full bore
Flow control: On/off only, not intended for throttling
Temperature range: 0°C to 99°C
Max. pressure: 2500 kPa (refer to graph)

Product Enquiry Form

The information in this specification must only be used for assessing a product’s suitability for a particular use.
The information remains the intellectual property of Zetco Valves Pty Ltd and must not be used or reproduced for any other purpose without Zetco’s prior written permission.