1331 FI x Nut & Tail AGA Approved Brass Ball Valve
A brass ball valve AGA approved to AS 4617 (Licence 5301 G) featuring a loose nut & tail connection and female threaded end which enables the attachment of other fittings to the valve. The integrated nut & tail connection and quality PTFE washer reduce joints and prevent leakage while providing a tight seal between the valve and the gas inlet of a continuous flow water heater.
Design Features
- Forged nickel-plated brass body & nuts
- PTFE washer for reliable leak-free sealing against an appliance
- Blow-out proof double o-ring stem sealing to prevent leakage
Production
- Manufactured in Italy under ISO 9001 Quality Management System
- All valves are pressure tested during production
Technical
- Size range: 15x15mm, 15x20mm, 20x20mm & 25x25mm
- Female ISO 7/1 Rp (BSPP) threaded connection
- Loose nut: ISO 228/1 (BSPP) female parallel threaded connection
- Flow capacity: Full bore
- Flow control: On/off only, not intended for throttling
- Temperature range: -10°C to 80°C
- Max. pressure: 2100 kPa
- According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Options
- Alternative handle colours available on request
- As component of continuous hot water installation kits
Certifications
 |
| AS 4617 AGA 5301 G |
Downloads