1330 Flare x Nut & Tail AGA Approved Brass Ball Valve
A brass ball valve with BSP flare (30°) and loose nut & tail connections AGA approved to AS 4617 (Licence 5301 G). The loose nut and integral tail reduce the number of joints required to safely connect copper gas pipe to a continuous flow water heater while a quality PTFE washer offers additional leak protection by sealing between the valve and appliance.
Design Features
- Forged nickel-plated brass body & nuts
- PTFE washer for reliable leak-free sealing against an appliance
- Blow-out proof double o-ring stem sealing to prevent leakage
Production
- Manufactured in Italy under ISO 9001 Quality Management System
- All valves are pressure tested during production
Technical
- Size range: 15x15mm, 15x20mm, 20x15mm & 20x20mm
- JIS-30° (BSP) flare connection conforming to AS 3688
- Loose nut: ISO 228/1 (BSPP) female parallel threaded connection
- Flow capacity: Full bore
- Flow control: On/off only, not intended for throttling
- Temperature range: -10°C to 80°C
- Max. pressure: 2100 kPa
- According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Options
- Alternative handle colours available on request
- As component of continuous hot water installation kits
Certifications
 |
| AS 4617 AGA 5301 G |
Downloads