Description
A DZR brass ball valve with press-fit and loose nut & tail connections AGA approved to AS 5830.1 (Licence 5301 G) for connecting gas pipe to a continuous flow water heater. The integral tail, loose nut and quality PTFE washer prevent leakage between the valve and appliance, while the press-fit connection provides a secure flame-free connection to pipework.
Design
Forged dezincification resistant brass body
PTFE washer for reliable leak-free sealing against an appliance
Blow-out proof stem to prevent leakage
Conical PTFE stem sealing system for additional leak protection
Production
Manufactured in Italy under ISO 9001 Quality Management System
All valves are pressure tested during production
Additional testing to DVGW VP 614
Technical
Press-fit connection conforming to AS 3688
Loose nut: ISO 228/1 (BSPF) female parallel threaded connection
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range: -20°C to 100°C
Max. pressure: 2500 kPa*
*According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Use with Viega®, Rothenberger® & KemPress® V-profile tools only
Must be installed according to accompanying instructions