1071 FI x Nut & Tail WaterMarked DZR Brass Ball Valve
A DZR brass ball valve WaterMark approved to AS 5830.1 (Licence WM-000110) with a loose nut & tail connection and female thread end enabling the attachment of other fittings to the valve. The integral nut & tail and quality PTFE washer prevent leakage by reducing joints and providing a tight seal between the valve and the water inlet of a continuous flow water heater.
Design Features
- Forged dezincification resistant brass body
- PTFE washer for reliable leak-free sealing against an appliance
- Blow-out proof double o-ring stem sealing to prevent leakage
Production
- Manufactured in Italy under ISO 9001 Quality Management System
- All valves are pressure tested during production
Technical
- Size range: 15x15mm, 15x20mm & 20x20mm
- Female ISO 7/1 Rp (BSPP) threaded connection
- Loose nut: ISO 228/1 (BSPP) female parallel threaded connection
- Flow capacity: Full bore
- Flow control: On/off only, not intended for throttling
- Temperature range: -10°C to 90°C
- Max. pressure: 2500 kPa (refer to graph)
Options
- Alternative handle colours available on request
- As component of continuous hot water installation kits
Certifications
 |
| AS 5830.1 WM-000110 |
Downloads
Related Products
- 6301 Zetco WaterMarked DZR Brass Press-fit x Nut & Tail Ball Valve
- 1070 Flare x Nut & Tail WaterMarked DZR Brass Ball Valve
- 1331 FI x Nut & Tail AGA Approved Brass Ball Valve
- 1342 Conetite Compression x Nut & Tail WaterMarked DZR Brass Ball Valve
- 1343 Olive Compression x Nut & Tail WaterMarked DZR Brass Ball Valve