6301 Zetco WaterMarked DZR Brass Press-fit x Nut & Tail Ball Valve
A DZR brass ball valve with press-fit and loose nut & tail connections WaterMark approved to AS 5830.1 (Licence WM-000110). The integral tail, loose nut and quality PTFE washer prevent leakage between the valve and appliance, while the press-fit connection enables the valve to be connected securely and safely to copper pipe without the use of flame.
Design Features
- Forged dezincification resistant brass body
- PTFE washer for reliable leak-free sealing against an appliance
- Blow-out proof stem to prevent leakage
- Conical PTFE stem sealing system for additional leak protection
Production
- Manufactured in Italy under ISO 9001 Quality Management System
- All valves are pressure tested during production
- Additional testing to DVGW VP 614
Technical
- Size range: 15x15mm, 15x20mm, 20x20mm & 25x25mm
- Loose nut: ISO 228/1 (BSPP) female parallel threaded connection
- Press-fit connection conforming to AS 3688
- Flow capacity: Full bore
- Flow control: On/off only, not intended for throttling
- Temperature range: -15°C to 110°C
- Max. pressure: 2500 kPa
- Use with Viega®, Rothenberger® & KemPress® V-profile tools only
- Must be installed according to accompanying instructions (see p. 3-4)
Options
- Alternative handle colours available on request
- As component of continuous hot water installation kits
Certifications
 |
| AS 5830.1 WM-000110 |
Downloads
Related Products
- 6302 Zetco AGA Approved DZR Brass Press-fit x Nut & Tail Ball Valve
- 1070 Flare x Nut & Tail WaterMarked DZR Brass Ball Valve
- 1071 FI x Nut & Tail WaterMarked DZR Brass Ball Valve
- 1342 Conetite Compression x Nut & Tail WaterMarked DZR Brass Ball Valve
- 1343 Olive Compression x Nut & Tail WaterMarked DZR Brass Ball Valve