Description
A DZR brass LPG gas ball valve suitable for installation with a gas regulator. Featuring an integral wall fixing bracket, the valve is also fitted with a bleed point to simplify setting of the the gas regulator and to take pressure readings. The male end connection allows for easy disconnection of the gas regulator, while the press-fit connection enables the valve to be connected securely and safely to copper pipe without the use of flame.
Design
Forged dezincification resistant brass body
Pressure readings can be taken with valve either open or closed
PTFE washer for reliable leak-free sealing against an appliance
Conical PTFE stem sealing system for additional leak protection
Blow-out proof stem to prevent leakage
Production
Manufactured in Italy under ISO 9001 Quality Management System
All valves are pressure tested during production
Additional testing to DVGW VP 614
Technical
Press-fit connection conforming to AS 3688
Male ISO 228/1 (BSPP) parallel threaded connection
Flow control: on/off only, not intended for throttling
Flow capacity: Full bore
Temperature range gas: -20°C to 100°C
Max. pressure: 2100 kPa (refer to graph)
According to AS 5601 Table 4.1, the operating pressure of consumer gas piping systems containing copper is 200 kPa
Use with Viega®, Rothenberger® & KemPress® V-profile tools only
Must be installed according to accompanying instructions (see p. 3-4)
Options
Size: DN15 (1/2")
Series 6261033 AGA approved LPG appliance valve – Type C
Series 6261233 AGA approved LPG appliance valve – Type B
